I tried the programming method below (which I found through a search- thanks, Mike, for the suggestion!), but I can't get to 'third base'. I keep pressing the 'security' switch and nothing beeps, clicks, etc.

Anyone got any further suggestions?

-Mark



To program the alarm:

1. make sure alarm (SECURITY) button on car is off.
2. turn key (ON) then back (OFF) (key only-not ignition)
3. push alarm button rapidly 8-12 times, until your horn beeps (AND CLICKING SOUND IS HEARD FROM GLOVE BOX).
4. push alarm remote button (FOUR TIMES -- IF YOU HAVE TWO REMOTES, PUSH ONE TWICE, THEN, THE OTHER TWICE -- FOR A TOTAL OF FOUR) to activate it.
5. turn car (ON -- KEY ONLY, NOT IGNITION -- THEN BACK OFF).
6. MAKE SURE SECURITY SWITCH IS ON AND RED LIGHT ON SWITCH IS FLASHING.
7. MAKE SURE ALL DOORS AND TRUNK ARE CLOSED.
6. and hit remote button (HORN BEEPS ONCE TO ARM/LOCK, TWICE TO UNARM/UNLOCK -- IF SECURITY SWITCH IS OFF, YOU'LL HEAR THREE SHORT BEEPS AND THE DOORS WILL LOCK -- BUT ALARM WILL NOT ARM.