|
Re: Need driver's side runner
Quote:
Originally Posted by Huskymaniac
Thanks John. Would you suggest this route versus using some 3M industrial strength double sided sticky tape?
|
Yes I would. I attempted the 3M route at one time but it allowed a gap between the sill and body. Maybe the new stuff is thinner.
However, before installing the new sills, I put clear RTV sealant under each end before snapping in the new clips. This prevents any sliding movement back and forth, which can contribute to the failure.
You could also put the RTV on the metal piece, on both sides of each clip, for added strength. Be sure to clean the underside of the sills, well as the metal, with a degreaser of some sort ( I use denatured alcohol)
.
__________________
.
Subaru Ambassador
1996 Polo Green LSi #216 ..138,100 miles. ..SOLD
JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan
In-Service Date: January 2, 1997
"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)
HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.
R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 
2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 
2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields. 
4th Registered Network member —2/21/2001
My NEW locker..I...My Email..I..Wikipedia/SVX .
.
|