|
Re: Re: Re: factory ignitor(s)?
Quote:
Originally posted by oab_au
Yes but that block containes 6 ignitors.
Harvey.
|
Ah, so the block has six ignitors. I'm looking at my aftermarket ecu options. I'm trying to determine how to wire up wasted spark mode. (The ecu I want has only 5 coil drivers, so wasted spark is a necessity.) I'm guessing I'll just take the signal off one of the coil drivers on the aftermarket ecu and run it into two ignitors (e.g. wire one coil driver into the ignitors for cylinders 1 & 2 which fire 360 deg out of phase, one coil driver into the ignitors for cylinders 6 & 5, and one coil driver into the ignitors for cylinders 3 & 4). Is this possible and correct?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|