That's correct, those rods and bearings are compatible. The Eagles are a good choice for FI.
Quote:
Originally Posted by TomsSVX
Just in case anyone wasn't following the "Boom" thread. The journal sizes on the crankshafts for the EG33 are the same as the 2.0l turbo, 2.2l, and the 2.5 turbo motors. This means we can use the Con rods either from these motors or their aftermarket rods as well. i personally will be going with a set of Eagle H-beam rods to compliment the StageIII pistons and Clevite bearings
Tom
Edit: Just make sure the height of the rod is the same... 5.137"
|