Ok..here is my pricing proposal for 8mm thick phenolic spacers:
Option 1:
Intake manifold spacers only, one set= two pieces, with a set of 14 extended bolts, the price will be $99 shipped.
Option 2:
Set of two intake spacers, plus throttle body spacer, plus 14 extended bolts for intake and 6 for the throttle body. $125 shipped.
Option 3:
Throttle body spacer only plus 6 extended bolts $35
At this point, I do not want to get in the gasket selling business, so I will find the PNs and point you at a few sources, or you can use your favorite sources.
As to the EGR - One option is to cut the tube and use a compression union fitting to reconnect the two halves, assuming there is enough of a straight section to do this. The other option is a set of block off plates, one at the intake manifold and one at the exhaust, which may not be permitted in your city/state, check before deciding. I have also seen other manufacturers saying that you can just put a piece of rubber tubing to reconnect the tubes, or you can stretch the tubing as described by Svxfiles.
The cost for either of these solutions should be about $15, but I want to get a set of spacers made up and experiment on my car to see what is best.
In order to move things along a little quicker, I will give a $10 discount on the first 6 prepaid orders of option 1 or 2.
As soon as I have at least 4 prepaid orders I will order the materials, expensive special milling cutting tools, bolts, make some fixtures, etc.... and get to making that nasty dust
Paypal address is
paypal@x35design.com Please include your forum name so I can keep track of y'all.
PS When I say $xx shipped, that means in the USA. For shipping to Canada, please add $8 to the prices. I will do export orders, but please contact me with your location so I can figure out shipping costs.
Who's first?
