|
I've determined my 94 definitely doesn't have an obd II connector. It has a 10 pin connector rather than the obd II's 16 pin connector. I noticed it has 9 wires and that on the odb II website there are 9 wires specified on the 16 pin odb II connectore:
Pin 2 - J1850 Bus+
Pin 4 - Chassis Ground
Pin 5 - Signal Ground
Pin 6 - CAN High (J-2284)
Pin 7 - ISO 9141-2 K Line
Pin 10 - J1850 Bus
Pin 14 - CAN Low (J-2284)
Pin 15 - ISO 9141-2 L Line
Pin 16 - Battery Power
Anyone have the pin outs of the 92-95 svx connector?
I've also learned that there are 3 obd II protocols and that almost all asian cars use ISO 9141.
California tested the automatic transmission legacy in 95 and it was fully obd II compliant. Who knows where the svx falls. If the wires on mine are the same as on the odb II cars but the computer doesn't use iso 9141 or have all the info the later ones do i might just buy a 97 computer and slap an obd II diag plug on my harness.
|