|
Re: Removal of Fuel Injectors
Quote:
Originally posted by SVXRide
Does anyone have any advice (constructive, that is! ) on removing the fuel injectors from the fuel rail? I've removed the little half caps that hold them in place and I've checked my shop manual so I know they've got two o-rings sealing them into the "buckets" in the fuel rail. I just don't want to possibly chew up the plastic top trying to pull them out.
Thanks in advance for everyone's help.
-Bill
p.s. my plan is to send them off to a FI shop to have them blue printed/rebuilt/flowed, so we'll have actual test results for how well they flow
|
I thought it was a quarter of a turn to remove them. Hmm.
So, are you sending them to RC Engineering? I've been wanting to do that for a long long time. Looking forward to seeing the result.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|