|
Steering Problem (replaced rack)
Ok, just got car back from getting new (rebuilt) rack. Steering is still very tight. I did need a new rack (right seal was blown and fluid was burnt bad) but he (mechanic) sugested the valve could be bad or that the rack is set-up too tight and would loosen. He said to drive it a while and see if it loosens up. I checked a new valve and it's $300!
Can I unplug the valve to allow the car to have full power steering? I have the electronically controled steering. Can I bypass this vavle?
Commuter, I've been keeping up with your thread and my steering was doing what yours is doing.
|