Quote:
Originally posted by 1994SubaruSVX
i have never looked at it so this is a blind question. 
|
Raise your hood and remove the latch hook. That should reveal the holes. There are three holes, configured "triangularly" two top, one bottom (I believe). Depending upon the condition of the double sided adhesive used to stick the emblem to the hood, you should be able to push on the little anchors in the holes and pop the emblem off. If the adhesive is still very strong, you can use WD-40, or "Goo Gone" or a similar solvent to soften it (so far, I haven't heard of anyone who's had to use solvent). Once it's off, clean the area where the old emblem has been (you'll have a dirty oval), then, place the supplied anchors in the holes, peel the backing off the adhesive on the new emblem and press into place. Then, replace the latch hook, and you're good to go.