Quote:
Originally Posted by spinn360
maybe someone other then me will do it. I just checked mine with the voltometer on ohms and slowly ran it up to5.0 from 0.0 or 1.0 (cant remember)anyways I think there is actually a write up of how to check the TPS in the how to somewhere. After I cleaned it it moved smoothly up and down, no jumping which might trick the TCU into thinking the gas was suddenly, and quickly moving, and turning on the power mode.
|
There is data in the how to section, which as it happens, I wrote. As explained a votmeter, ammeter or ohmeter, will not provide absolute indications of a fault, even though a worthwhile rough check can be made. What I have now suggested would be a far superior method.