Quote:
Originally Posted by Trevor
[Edit reference] I would presume the engine was not running, or the transmission engaged, when you did the test. If so all OK. If not something is suspect.
|
Yes, since the harness was not connected, it was not possible to start the car.
Looking further, I tested the resistance of my rear speed sensor ... between 500 and 600 ohm so I think it's ok.
I also try to put a switch on the brown wire of the Trans harness (the one that control the Sol C). Cutting power to the sol C is suppose to give 50/50 all the time ... no chance, still no power on the rear wheels.
So now I think every electrical components tested OK ... it must be mechanical.