[longassname]

I think i was wrong..I found dynomatts numbers and they are similar but different.

Intake port flows have been done, but in Australia we use 10" of water vs your 28" of water I think. So 10" water figures (you'd need to change them) are:

4mm - 84cfm
6mm - 123.8 cfm
8mm - 150.8cfm
10mm - 158.9cfm
12mm - 160.3cfm
14mm - 159.3cfm


The exhaust flows diffeently. It has the following:

4mm - didn't get them
6mm - 98.1cfm
8mm - 109.8cfm
10mm - 113.8cfm
12mm - 116.7cfm
14mm - 118.3cfm