Quote:
Originally posted by Mr. Pockets
Man, I am so glad I didn't do THAT when I replaced my plugs. I had every other problem - but not that one. 
I just saw a set of tools at Sears yesterday that were designed to remove rounded-off bolts. But you have to hammer them on to the head, and I dbout you have the room.
My only other idea is to use a dremel grinding wheel (probably three or four of 'em - they don't last long ) to just take the entire head off the bolt. Then you could remove the coil and have the whole length of the bolt to grab on to with a vice-grip or something similar.
|
Thanks, I agree there wouldn't be enough room for the first idea. As for the second, don't think that would work either. There is threading on the coil itself and it would still be stuck in.