Well we're making more progress on the conversion. Yesterday and today we've adjusted and installed the shifter. Our goal was to have the shifter centered in the trim panel opening so that cutting the trim would be avoided.
The driveshaft is also installed thanks to a friend of my dad's who fabricated the extension for the shaft.
We put the axles back in and we're currently working on the large heat shield so that we can put the exhaust back on. We're still trying to find where we misplaced the exhaust hanger.
Still to go is most of the wiring for mostly everything as well as basic reassembly. It's starting to get exciting as the project end is close at hand.
|