Help ;-; Failed emissions... unique ->
I had to go in twice.
The first time I passed (technically), but just barely.
The second time I failed horribly.
First test:
-------------HC ppm------------------------CO%--------------
-----limit---reading---result----limit----reading-----result
idle__750_____78____PASS____1.00____0.92_____PASS
Second test:
idle__750____295____PASS____1.00____2.21_____FAIL
The 02 reading dropped dramatically during the second run, and now that I look, the rpm idle for test one was 908, test 2 was 608.
I'm sure the drop in RPMs made a difference...
There was one other factor. For test one I had the cone filter installed. That's why I got failed even though the emissions were fine. Second test I had the stock filter on.
Suggestions?
What is the proper idle? I thought it was around 690.
Last edited by NikFu S.; 12-09-2004 at 01:47 PM.
|