Quote:
Originally Posted by SVXdc
A few people have added aftermarket alarm systems with a trunk solenoid. They attached the solenoid to the release cable just a few inches away from the latch mechanism.
There's even a handy outlet back there with +12V you can use for the solenoid. See this post.
If you want to control that from a switch or an alarm module up front, you can intercept the +12V wire at the fuse panel under the dash. Use something roughly like an add-a-fuse and wire your switch or relay in between. |
Very useful info, I did not know that was even there. That could be very helpful.