[cdigerlando]

Got my heads back from the machine shop. They look nice with the pretty new valves. Got the block back, but had to return it to have some grooves cut in the semi decking to allow some better coolant flow, since the inserts extend into the water passages. There is some room between the gasket and the bottom, but I want more room for sufficient flow. Also he needs to cut rings on the last three of my pistons. Hopefully he will finish by the end of the week so I can start to slowly assemble everything. I also received the cometic head gaskets and other subaru motor parts. I'll take pics as I progress through the assembly.