Quote:
|
Originally Posted by mhl0125
Feedback done. Thanks.
OK----Cananyone help me with Trouble Code 1?? What do I have to do next to locate the culprit. Are the broken or shorted solenoid valve circuits located in each wheel or are they under the hood with the ABS unit?
|
The solenoid valves are in the ABS unit under the hood. They turn off the line to the wheel that is locking up. You can check that the valve is operating or not, by checking at the connector that is behind the kick panel near the door. There are three connectors there. The long Black, two row, 20 pin one is the ABS. If you short terminal 2 to ground, which is the second from the left, top row, you should hear the solenoid click at the ABS unit under the hood.
You need to have the ign on to check, once you have checked one, you have to turn the ign off and on again to check again.
The other solenoids are;
Code 1, Left front wheel,.connector 2.
Code 2, RFW , connector, 11.
Code 3, RRW, connector, 12.
Code 4, LRW, connector, 3.
Top row of the connector plug is No.1 to No.9
Bottom row is No.10 to 20.
Harvey.
