[Noriyasu]

Originally Posted by Mike621

What did you end up doing for head bolts? I see OE and aftermarket out there now:

https://www.enginepartsonly.com/1995...xoC7eYQAvD_BwE set for $120

https://www.subaruoempartsoutlet.com...BoCeS0QAvD_BwE OE @ $11 ea

I used this. I used a slightly thinner gasket, so the compression ratio was calculated to be 10.4. I polished the exhaust and intake ports and manifold. In fact, above 4500rpm the engine runs much smoother than the original.

https://www.ebay.com/itm/One-Cylinde...7/232960166185