Quote:
|
Originally Posted by pghopkins
yup, got it. It's a 6x40x20.
|
Quote:
|
Originally Posted by pghopkins
I could have taken a bolt down to Lowes and tried to fit a nut to it but this way was mucho easier.
|
That number doesn't give the thread pitch. It just gives diameter (6), Thread length (40) and shoulder length (20). The number needed for the tap will be something like 6x1.0 or 6x1.5??
Take a good bolt along and find a nut that will fit it, then get that tap.