I get a Code 14 from the diagnostic computer. That one is rear limit switch is stuck on. Now that I know the problem, any suggestions for the best way to tackle "unsticking" the switch?
I used an allen wrench to pull the seat belt to the back. Then, I disconnected the battery for about an hour. I reconnected the battery and when i opened the door, the belt went forward again. However, when i shut the door and turned on the engine, the belt remained forward.
I've been searching through past posts and am having a hard time piecing together what I should do next. Any suggestions?
Last edited by angrydan; 12-05-2005 at 09:46 AM.
|