Price of part from local dealer: $8.84CDN.
Pics are in my locker for the disassembly process.
1) Remove felt from door handle/storage, and remove 3 screws.
2) Remove panel from underneath door opening latch/handle, and remove 2 screws.
3) Remove 2 screws at the "front" of the door, and pry the door panel from the bottom to remove. Panel is held in place by plastic snaps.
4) Remove the trim/armrest support by removing the two screws. Peel back plastic for weather proofing.
5) Adjust the window motor cable using the power window switch until the little "nut-looking" piece on the cable is in this area. Fit the "sleeve lock regulator" onto this "nut". Adjust window manually about 1/2 way down. You will see the black metal support attached to the glass, with a square opening in the middle. Put sleeve lock regulator into opening and slide into place for a snug fit.
6) Reverse removal procedure.
Time: Less than 30 minutes.
Who said this car is expensive to fix?
(I should learn to keep my mouth shut in case my car hears me and breaks something expensive...)
VK