Quote:
Originally posted by benebob
They didn't just get it dirty did they? Aparantly if you let Isuzu's sit for a month or two w/o driving it the rotor rusts up so much that when you do drive it the rust flakes cake the abs sensor at the wheel. Most places will just replace it but There's a shop that'll clean em for the account I work on. I'd suspect that the design is similar. Not that rust got in there but maybe dirt.
|
Or maybe someone removed it wrong broke it in process. Sure is funny all was Good before the bearing was replaced. Now after it was replaced I got an ABS problem out of the blue..
nah Dont think so..
Lets put it this way I have few enemies. Might be because I'm just such a nice guy.. then again nice folks do have Evil sides.
my ABS sensor will be fixed and SOON.. otherwise it's going to be a bad day for a Suby shop. If I have to go out and buy a sensor, I don't care.. Just as long as it's Fixed.. IT's starting to get cold and rainy. Ice and slick roads huh, this is just what I want..
svx1999
Ryan
Dirt didn't cause this failure I'm afraid. I wish or I would clean it myself.