|
Re: Getting ready to install my tranny cooler
Quote:
Originally posted by SVXgarcia
Whats' up guys
I'm having my Transmission Cooler installed by my Mechanic on Thursday. I got the BMM-70268 cooler from Summitracing.com.
Well, I guess I just want some advice, is there anything that I should let my mechanic know before he proceeds with the installation? I just figured that since so many of you have gotten the installation you might have some advice. One other thing, where can I get that digital transmission Temp. gauge that I've seen in some pics, and how hard is it to install?
Thanks
|
There is the question of which order to arrange flow through the auxillary cooler and the stock cooler. I had mine routed first through the stock cooler and then through the auxillary cooler. This is probably better for summer driving because the stock cooler, which runs fairly hot because its in the radiator, can take the first duty of cooling the hot ATF, and then the auxillary cooler gets to do its work.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|