|
Re: Misfire and TPS adjustment issues
Back at this again. I removed the MAF Monday night and took the cover off. I checked all of the connections with an ohm meter and they were perfect so I didn't resolder anything and put it back together.
Yesterday I finally got the CEL to come on. The codes are P0301 (cylinder 1 misfire detected) and P0306 (cylinder 6 misfire detected).
My Actron OBDII scanner also has "inspection & maintenance monitors" that test the operation of emission-related systems or components and detect out-of-range values. It came back showing that for the EGR system the "required driving conditions for that monitor have not been completed or it did not pass."
So I guess the next move is to remove the EGR to clean it out and check the connections.
__________________
Jon
1997 SVX LSi Bordeaux Pearl
1995 SVX L AWD Polo Green - 277k miles
1986 Pontiac Fiero 3.4L Twin Dual Cam V6
Last edited by Coan; 02-27-2013 at 11:56 PM.
|