Quote:
Originally Posted by svxistentialist
This is totally cool, Nomake. You are now LEGEND!!
As Phil suggests, we need to write up a full How-To on this. Using the blue wire is OK on a temporary basis, but the correct way is to install a console switch, just like the JDM models have. Run your wire to it from Pin 4, and you can switch in and out power mode as you wish!!.
And as Phil mentioned, same as I used to do, you will leave it on full time, the drive is better with it ON.
Joe
|
Nomake has confirmed what I have always suggested, i.e. that the inputs are simply used in different ways, in order to achieve a desired result as has been called for, or dictated, by the sales dept.