Thread: Full bushings replacement
View Single Post
  #41  
Old 05-23-2012, 01:59 PM
James Scott James Scott is offline
The Molinator
  
Join Date: Nov 2002
Location: Fresno, CA
Posts: 1,002
Talking Re: Full bushings replacement
Quote:
Originally Posted by 92snowmachine View Post
picture of a bushing
So? .. There are fender washers on each end to hold the POLY bushing halves together in the A-Arm? .. or other metal suspension part? Normally, the rubber bushings are solid.. with inner and outer shafts fused to the rubber .. right??

Thanks, Jim
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011)
Valentine One Radar Detector with Remote Display - ucan'tseeme!
Last edited by James Scott; 05-23-2012 at 02:04 PM.
Reply With Quote