Re: recommended maintenance: replace vacuum hoses at 100K miles
I've spoke a little too soon, I replaced all the vacuum lines/pcv/knock sensors as described above however now I the car won't start.
Initially the car rev'd to 2k then stalled. Now after after 2 times of doing that, it'll barely get above 200-300 rpms before stalling out. Each time it does this now. If i give it gas I can get the car to remain running but it' still rough, and the moment i let off the gas it will stall.
Given that i've touched everything to do with the intake, it could be anything. I did NOT replace the intake manifold and throttle body gaskets. I've read that that faulty gaskets can cause symptoms as described above, is that true?
|