|
Shoe Clearance Adjustment
1. Remove adjusting hole cover from back plate (rubber plug)
2. Turn adjusting screw using a flat screwdriver (move screwdriver upward) until brake shoes touch the drum (will stop moving)
3. Turn back (downward) adjusting screw 3 or 4 notches.
4. Install adjusting hole cover into back plate.
Lever Stroke Adjustment
1. Remove console box lid.
2. Forcebly pull parking brake lever 3 to 5 times.
3. Adjust parking brake lever by turning adjuster until parking brake lever stroke is set at 6 to 7 notches withoperating force of 44 lb.
4. Tighten lock nut.
5. Install console box lid.
Attached is the scan from the shop manual so you can see what they are talking about.
Doug
__________________
1992 LS Touring (6/91) - Currently undergoing a five speed swap
Black over Claret with spoiler; 235,000 miles; Mods: 2002 Legacy 5 speed, ACT Pressure Plate, Excedy Clutch, Short Throw Shifter, Aussie Powerchip
1992 LS Touring (6/91)
Black over Claret with 2.5" setback spoiler; 202,000 miles; Mods: B&M Cooler
1994 LSi (4/93)
Bordeaux Pearl; 198,000 miles; Mods: Weight reduction.
1969 Mustang GT Convertible
1970 Mustang Convertible
2000 Ford ExcursionSola lingua bona est lingua mortua.
My Locker
Last edited by mohrds; 10-05-2002 at 07:08 PM.
|