|
It is not that hard to replace the timing belt or reset the timing. You can download the manual I have attached to see if you wand to give it a shot. I was advised by the subie dealer to use the big paper clips, black ones that the metal handels flip over, those ones. Use them to hold the timing belt inplace on the cam sprockets. the hardest part is compressing the tensioner. A 5" jaw vise workd best.
I think that the timing belt might be an issue. Mine did not always turn on the CE light when I had the problem. Car warmed up on came light, little bit later out it went. some times it did not come on at all.
Good Luck
Steve
|