I have had the pleasure of seeing this image before. The plug I was referring to is 84956A. It merely closes the hole left in the fog light access cover.
If you wish to use the 9005 high beam, you will need to change the reflector assembly since it has the mount molded into it.
The low beam has a bulb adapter held in place with three phillips head screws for either a H4 or the 9006 so that could be quickly swapped.
Personally, I would leave in the H3/H4 and just add the fog light reflector into the assembly.
Doug
__________________
1992 LS Touring (6/91) - Currently undergoing a five speed swap
Black over Claret with spoiler; 235,000 miles; Mods: 2002 Legacy 5 speed, ACT Pressure Plate, Excedy Clutch, Short Throw Shifter, Aussie Powerchip
1992 LS Touring (6/91)
Black over Claret with 2.5" setback spoiler; 202,000 miles; Mods: B&M Cooler
1994 LSi (4/93)
Bordeaux Pearl; 198,000 miles; Mods: Weight reduction.
1969 Mustang GT Convertible
1970 Mustang Convertible
2000 Ford ExcursionSola lingua bona est lingua mortua.
My Locker
|