|
Re: Flashing CEL after cold start
Quote:
Originally Posted by AUSVX
I've made a mistake once before where I've left 1 of the 2 diagnostic wires plugged into the connector that you use to check for codes. If you've recently checked for codes and left the wire till plugged into the connector, that maybe the culprit.
It says in the manual not to start your engine with the diagnostic wire plugged into the connector but it doesn't say the car won't start... It will start and just keep flashing.
Jordan.
|
While this is true, his car is a 96 US model which has the OBD-II. It requires a scanner to plug in to retrieve codes. Great advice though.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD
1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild
1993 Justy 4wd 5door- Teal of sorts , beater.
2008 OBXT Newport Pearl 65k miles
|