|
mbtoloczko, since you have the get up to log analog data with your wideband software how about logging the maf signal? It's the wire. That'll be a quick and true way to see if the maf is in fact maxing out at 5600 rpms. The max will be 4.8 volts not 5.12. I'm curious to see if the meter goes up to the full 5.12 or not but anything at 4.8 or above will read the same in the software. The table values for 4.8, 4.88, 5.6, & 5.12 are all ffff-it's maxed out mathmatically whether the hardware is maxed out or not.
|