|
For those that asked...
Parts list for 5/6mt swap
__ 5/6mt assembly
__ 5/6mt shift linkage(be sure to get all the pieces)
__ 5/6mt starter(both are the same at least for wrx5mt and sti6mt)
__ Helicoil kit for starter stud(late model transmissions)
__ 5/6mt slave cylinder(hydro only)
__ 5/6mt Master cylinder(hydro only)
__ Hydro clutch line (both hard line and soft line)
__ Neutral Safety Switch(for pedal box)
__ Brake/Clutch Pedal assembly
__ Clutch Kit(disk, pressure plate, throwout bearing, pilot bearing)
__ Flywheel (transmission specific)
__ Flywheel bolts(longer than flex plate bolts)
__ Pressure plate bolts
__ Transmission mount
__ Rear shift linkage mount(stock or homemade)
__ Matching rear differential(n/a for wrx transmissions)
*If using the 3.90 R180 be sure to obtain a set of rear axles as well
__ 2" extended driveshaft(for all 5mt transmissions)(95-99 Legacy 5mt shafts are known to work with minor modification)
*N/A if using 6mt
__ 5/6 quarts of gear oil
__ 4 quarts of brake fluid(bleeding brakes and clutch)
Tom
|