you can simply disconnect everything attached to the unibody and drop it out the bottom of the car. OR you could lift it out. I chose to lift it out when i do mine. Unbolt the trans the motor mounts heater core lines, take radiator out, trans cooler lines, fuel lines, oh dont forget the torque converter bolts. Take the alternator a/c and ps pumps off the engine and lay them next to the motor out of the way. Double check to make sure all 4 connectors on the pass rear of engine are disconnected and out of the way. make sure the ps cooler lines are disconnected on the bottom of the motor. Besides that it should be good to go. Just make a laundry list of all these things and check them off when you do them. then double check to make sure everything is disconnected. Oh, unbolt the motor mounts from the bottom, they are on the underside of the unibody crossmember that the engine sits on. Hope this helps.
Tom
|