[ZephTheChef]

Originally Posted by b3lha

The 3-pin cable is correct. The USB design doesn't need to be powered by the car, so the power cable is omitted.

You need to replace Evoscan's Data.xml file with the one on this page:

http://www.alcyone.org.uk/ssm/download.html

Then you should be able to get it working. If not then refer to the troubleshooting page to see if you really do have the 92 problem:

http://www.alcyone.org.uk/ssm/troubleshooting.html

Phil.

Hey, thanks so much! I'll have to try that out tonight.

Your website has been infinitely helpful to me already, (if a bit technical from a n00b standpoint) I guess I must have missed the downloads page. By the way, I have been working on hammering out a much more comprehensive RomRaider XML. I'll perhaps post up a copy when I've had some more time to play around with it and know that I've gotten everything right and working.

I was also working on writing a configuration file for TunerPro...haven't gotten very far with that yet, been too busy working on the turbo project to mess with the ECU stuff much lately.