|
Re: Sunroof Gasket -- This isn't right, right?
Quote:
Originally Posted by gstape
When I had mine off to repaint my roof a couple years ago I ended up with a similar gap when I put it back together. I took it back off and stretched it a little and put it back on. Then the gap was mostly gone. There isn't anything else that goes in there.
|
There should be no gap.
My pearlie had a gap in the sunroof rubber (about 1/2") when I bought it. When I had the sunroof panel repainted, the shop took the molding off. When they reinstalled it, they also stretched in so that it actually overlapped at the ends. After they installed it the rubber was compressed at the ends and has never moved, maintaining a perfect seam with no gap. The same with my polo
Do this in warm weather or use a heat gun or hair dryer to soften the rubber a bit to make it more pliable.
.
__________________
.
Subaru Ambassador
1996 Polo Green LSi #216 ..138,100 miles. ..SOLD
JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan
In-Service Date: January 2, 1997
"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)
HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.
R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 
2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 
2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields. 
4th Registered Network member —2/21/2001
My NEW locker..I...My Email..I..Wikipedia/SVX .
.
Last edited by svxcess; 01-05-2010 at 07:50 AM.
|