Quote:
Originally Posted by Trevor
Yes it will work and may look pretty and you may not have any problems.
However, your engine will no longer incorporate any means of torsional vibration dampening and this will impose unwanted stresses on the crankshaft. Accessories will run at a slower speed including the alternator, which could be important if you are running extra electrically powered gear.
|
To be honest trevor, I don't see the stocker really doing much along the lines of dampening vibrations. I have been running an undersized pulley for my S/C for quite some time now with the only alternator issue being that sometimes it likes to get torn off the car
Either way... the only upside to an underdrive pulley would be that it is a one piece... Other than that any real performance gains cannot be obtain through such simple means
Tom