Quote:
Originally Posted by longassname
If I am wrong somebody correct me so I don't missinform Phil--I don't think you can change the lug studs on an SVX without pulling the hubs. If the threads are just dirty you can run a die over them and lube them before installing the nuts. If i remember correcly it's 12x1.25
|
The hubs do not have to be removed to install the lug studs, front or rear. A year or so ago, I had to replace one in the rear and about a month ago, one in the front. I don't remember specifically re the rear, but I did have to remove the back shield to get the stud in to start with. Then it was a pain to press it in, actually "pulling" it in the hole with a lug nut and washers ....... but it sure beats having to pull the hub ......
Harry