|
The good news is you are almost done - you've figured out the tricky bolts on the sides.
The skin is held to the main bumper beam/assembly by 20 or so bolts that you can only undo if you remove the whole assembly.
The assembly is held to the body by 4 largish bolts accessible on the trunk floor - remove the carpet and the cardboard thingie and look for longitudual beams at approx 1/3 car width. There are 2 bolts on each side. They are hidden under black round plastic plugs.
Once you removed the bolts, you will see the bumper assembly move. From there it is simply lift and remove, but it is better done with a helper or you will scratch paint on the body. It is not terribly heavy, but you do need second set of hands to move the sides a out a bit...
|