|
Re: Alcyone JDM Hood emblems back in stock
Quote:
Originally Posted by Rod.
Thanks.
Are these OEM? Yes they are. OEM for the JDM Market. The P/N is 93060PA030.
How do they attach?
1. Open the hood
2. Remove the hood latch by removing the two 12mm bolts. This uncovers a 1/2" access hole, through which you can see the two yellow clips holding the emblem in place.
3. Use a small flat-bladed screwdriver through the hole to push against one, then the other yellow clip. The old emblem will pop off without too much resistance.
4. Clean any residue from hood left by the old emblem. Peel the adhesive backing protector strip from the back of the new emblem and insert the two yellow clips into the holes. Apply firm pressure all around the emblem once the clips are pressed completely into the holes.
There are three pins On the emblem (two with yellow grommets) The top two are the ones which actually hold the emblem on, along with the adhesive layer. The third pin in the center is a guide pin so that the emblem goes on straight and doesn't twist.
How much is shipping to S7K 6B7 in Canada?
Small, light package. Should not be too much. Ask Dayle.
|
.............
__________________
.
Subaru Ambassador
1996 Polo Green LSi #216 ..138,100 miles. ..SOLD
JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan
In-Service Date: January 2, 1997
"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)
HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.
R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 
2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 
2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields. 
4th Registered Network member —2/21/2001
My NEW locker..I...My Email..I..Wikipedia/SVX .
.
Last edited by svxcess; 10-22-2011 at 01:02 PM.
|