|
Re: no start after installing ecutune stage 2 help please!
Quote:
Originally Posted by immortal_suby
Recheck your stage 2 ECU chip installation and make sure the board is seated in there fully.
If nothing there, next step is to find out if it is gas or spark.
|
+1 on that. When I put in my stage 1 chip it was not seated all the way and it did the same thing, a strong crank but would never catch.
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert
Reading Box of Wine Car
-----------------------------------
1992 SVX LSL 5-Speed Sold at 180K 2019
1995 SVX Lsi Polo Sold at 118K 2007
|