Quote:
Originally Posted by knight'92
and my hesitation is so bad in the morning/night after work
that it doesnt matter if you are giving it 10% or 100% throttle
it just will only go about 10 mph...
|
Clean Mass Air Flow meter with MAF cleaner and take off Airbox and clean throttle body. Use carburetor cleaner for throttle body and MAF cleaner on connectors/MAF. I had the same thing happen to me a long time ago.
Your MAP could be fouling also (happened on my 1992 SVX at 160,000 miles) so Airbox needs to come off (so you can plug the MAP wires back in..on firewall) spray connectors vigorously (with MAF cleaner) in connector housing and plug in, reconnect plugs after 5 minutes - To make sure MAF cleaner has completely dried off , then the fun part of reconnecting that Air Box.