|
Re: Info required on the Headlight washer option
You can see in the photos in the previous posts that there is a small tube with red clips - where does this go to ?
Both bottles have output hoses, the secondary bottle appears to have 3 hoses.
1 = input from other bottle, using gravity to feed from it.
2 = output to tee and then squirters
3 = ???
I remember seeing a breakdown (exploded drawing) showing all the parts, but I cannot seem to find it anywhere?
any help with drawing or info on the 3 hose?.
TIA
Steve in New Zealand
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
|