Re: ft. axle seal off the transfer case.
The diagram gives a SOA part number of 806730032, I searched for that number on Rock Auto and got 2 matches, Timken 223050 and SKF 11636, is that what you got?
To pull the stub, if the axle is removed from the hub but still attached at the trans stub, use the axle like a slide hammer and the stub will pop right out. If the axle is removed, put a punch or screwdriver in the hole that the roll pin goes through and use a pry bar or slide hammer.
__________________
Dave
- 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0
Last edited by Hocrest; 09-08-2015 at 03:16 PM.
|