|
Re: Some Troubleshooting help please
ok...replaced the crank sensor...nothing... cleared codes ...tried to start the car but i'm still getting the 11 code (no signal from crank sensor for 3 sec after start switch on) that's the only code right now.
Question: looking at the old sensors both the cam and the crank there is some denting on the bottom. Could the part that the sensor senses have come off?
I'll check the wires again... and get a continuity check to see if the wires are good...in the mean time.... I'm still open to suggestions.
__________________
Mitch Hansen
"uncamitzi"
This is a Dark Ride
92 Teal SVX LS-L 128K tranny swap with 4.11's
Well.. my days of not taking you seriously have certainly come to a middle .
|