I swapped some of the vacuum lines with the ones off the intake manifold for my jdm engine so now it has all good lines but some are older than others. I also mispoke, the harness is not new it is just a good harness that I re-taped when I built the 8 to 1 engine. It was the lower harness I had bought new. The manifold itself is very nice by SVX standards. It's got some belt dust on it I haven't cleaned off but all in all it's very nice. It still has the finish on it. Here are a couple pictures I took of it next to the jdm manifold which like most svx manifolds was corroded and has had the finish scrubbed off it in order to clean up the corrosion. To be clear the one with the throttle body on it when pictured from the top is the one off my 8 to 1 motor which I will sell. The one scrubbed clean on top and is less clean underneath (and devoid of egr plumbing) is the jdm one from the driveline swap I'm about to write up.
