Quote:
Originally Posted by dannmarr
I did the install but I got no Power light. It lights up on start up, but not when I use the switch. I hooked up A4 to a toggle switch, then to the blue wire under the kick panel. Am I doing something wrong? Do I need a specific type of switch?
|
As long as your switch it a "toggle" (flip switch for continuous "on" or "off"), and not a "momentary" (push and hold for "on") type, then yes you have the right switch.
Run a wire from the other side the switch to a piece of metal frame in your car.
I used a ring terminal on one the bolts under there, I think it may have been the one that holds the TCU bracket, it was one them easy to get to bolts under there I used.