I just had the rear suspension worked on and for that we all know the rear interior panels need to be removed. I planned a lot of work that needed to be done while all the panels were out so I tackled several items on the list.
Replaced the rear speakers and a light dynamat and padded foam/vinyl install in the back and trunk.
Also replaced the rear tail light with a JDM unit. It needed some heavy polishing, so 2500 grit sandpaper and Maguiar's plastic polish made it look like new.
I also replaced the lower rear left and right window trim while I had all the panels off.
photo 3 by
dbarnblatt, on Flickr
Cleaned and waxed the trunk lid while the tail light unit was out...
photo 2 by
dbarnblatt, on Flickr
photo 2 by
dbarnblatt, on Flickr
Old window scraper... and nice new one!
photo 3 by
dbarnblatt, on Flickr
Old... new.
photo 2 by
dbarnblatt, on Flickr
Cleaned off the body panels before intalling. Had loads of accumulated dirt and debris.
photo 2 by
dbarnblatt, on Flickr
New rear window trim on left and old door trim on right. Doors will be done next month.
photo 5 by
dbarnblatt, on Flickr
Really proves that the little things make all the difference.
photo 2 by
dbarnblatt, on Flickr