[Dubya-r-ex]

Well, I was able to get to the connectors but came across nothing that looked out of place or damaged. Unless there is a break somewhere between where the mirror arm mounts up and where it goes down the B pillar it seems like there is no issue. I tugged on the wire a bit so if that were the case it probably would have separated the wire more. Before I put everything back together I test ran the system and sure as **** everything started right up. All the wires appeared to be in good shape with no real deterioration and the fuse was all good so I'm thinking that one of the wires going into the connected had just wiggled loose. I'm not sure that would have caused my problems though.

Thanks guys. If it happens again I'll know right where to look.